Modbus Slave 7.4.4.zip

丨六点半丨Modbus Slave 7.4.4.zip 2.09MB

资源文件列表:

Modbus Slave 7.4.4.zip 大约有4个文件

Key.txt 38B
ModbusSlaveSetup32Bit.exe 985.69KB
ModbusSlaveSetup64Bit.exe 1.17MB
ModSlaveChangeLog.txt 8.3KB

资源介绍:

Modbus Slave 安装包，无需积分

2021-11-19 Version 7.4.3 - BUG: Fixed an issue with license key validation. 2021-08-17 Version 7.4.2 - NEW: Print ASCII chars when Hex format is selected. 2021-06-16 Version 7.4.1 - BUG: Fixed an issue where exception code was not returned if number of registers > 125 when reading holding registers. 2021-05-27 Version 7.4.0 - NEW: Many new OLE/Automation functions. 2021-01-09 Version 7.3.1 - BUG: Fixed a windows placement problem. If a new window was opened on an extended display with some different scale,layout or display resolution than the main display. 2020-05-10 Version 7.3.0 - NEW: Naming of single bits in binary display mode. 2020-04-20 Version 7.2.1 - NEW: If the user has switched from a dual monitor to a single monitor since we saved the workspace, then ensure that main window is still visible on the single monitor. - BUG: If a workspace file (*.msw) was dragged and dropped on the grid area, Modbus Slave terminated. 2020-04-16 Version 7.2.0 - NEW: Hex mode address input. - NEW: Resize modbus window to fit grid size. 2020-03-26 Version 7.1.2 - BUG: Baud rate 256000 missing in enumeration. 2019-11-19 Version 7.1.1 - BUG: The obsolete OLE/Automation function Longs fixed. 2019-09-29 Version 7.1.0 - NEW: Baud rate 153600, 460800, 921600. - NEW: Set decimal separator comma or dot to the user-default ANSI code page obtained from the operating system. 2018-05-26 Version 7.0.0 - NEW: 32 Bit unsigned int supported. - NEW: 64 Bit signed and unsigned int supported. - NEW: Display the Modbus address with the value in the cell. 2017-01-31 Version 6.2.0 - NEW: Timestamp in communication traffic. - BUG: Using Modbus TCP/IP: Communication traffic showed false bytes if unit ID did not match. Version 6.1.3 - BUG: Could not register Modbus Slave as COM control from C# and VB. - BUG: Setting unsigned register from Excel for values > 32767 Version 6.1.2 - CHG: Save row height as in version 6.1.0. to support collapsed rows. Version 6.1.1 - CHG: Fonts changed for support of high resolution monitors. 2015-10-26 Version 6.1.0 - NEW: Baud rate 230400 Version 6.0.3 - BUG: CRC error simulation did not work when RTU Over TCP/IP connection was used. Version 6.0.2 - NEW: Context menu (Right click): Format menu items checked according to selected format. - BUG: Multiple cell formatting could fail in some cell selection cases. Version 6.0.1 - BUG: File open error. 2014-01-12 Version 6.0.0 - NEW: Format cells with individual data types. - NEW: Improved automation interface. Control connection settings from Excel and display Modbus values in Excel using Excel macro language VBA. 2013-11-17 Version 5.0.0 - NEW: Support of IPv6. - NEW: Log function for communication traffic. - NEW: Added a clear button in the traffic window. - NEW: Most recently used IP Addresses in connection dialog. - NEW: Modbus Slave remember its position. Ensure that Modbus Slave is still visible after switching from a dual monitor to a single monitor. Version 4.6.1 - NEW: Max number of windows extended to 100. 2012-03-10 Version 4.6.0 - NEW: Added display options: Byte swap for long, float and double. Version 4.5.1 - BUG: The change "Only available serial ports are listed" in version 4.5.0 do not work with virtual ports. 2011-12-02 Version 4.5.0 - CHG: Only available serial ports are listed. - NEW: Serial port number 1 - 255. Was 1 - 64. - CHG: Unnecessary error code for setting serial port buffers removed. Problem with opening of serial port in rare cases. - CHG: USB/232/485 converters using chip from FTDI with driver version 2.08.02 (August 11, 2010) and newer: The driver Detect error when application requests RTS_CONTROL_TOGGLE handshaking since this is not supported in hardware. Modbus Poll could not open the serial port with this driver. - CHG: Change of quantity only do no more clear existing values. Version 4.4.7 - BUG: Error Simulation: The "Return Exception 06. Busy" did not work as response for function 0x10. - CHG: The function "Read/Write multiple registers" is no more restricted to a single window. - CHG: Formatting of floating point numbers changed for better display of small numbers < 0 xss=removed> 2000. Version 4.2.1 - CHG: TCP/IP connection. Error information improved. - NEW: Possible to set the TCP server port. Was fixed to 502. 2007-05-18 Version 4.2.0 - NEW: Unicode support. Write any language in the alias cells. - NEW: XP-themes. - NEW: Save scroll bar position when save to file. - NEW: Now you can set "Display Type" in the "Slave Definition" dialog box also. - CHG: Help files now use html format. - CHG: Display Binary is formatted as: 0000 0000 0000 0000. Was 0000000000000000. 2006-06-03 Version 4.1.0 - NEW: Error simulation: - Insert random CRC errors - Delayed response - Skip response - NEW: If a "*.mbs" file is located in the same directory as the workspace (*.msw) file then the "*.mbp" file is stored as a relative file name in the *.msw. This allow you to move the *.msw file with the *.mbp files to another directory. Thus The *.mbw file will still be able to find the *.mbs files as they are relative to the *.msw. 2006-06-03 Version 4.0.0 - NEW: Grid used to view Modbus values. - NEW: Alt+S, Alt+U, Alt+H and Alt+B used to change display types. - CHG: F8 used to display Poll definition instead of F2. (F2 used to edit cell) Version 3.1.5 - NEW: Serial port 1-32. Was 1-8. - NEW: Hyper link in about box. - BUG: Double click a *.mbp file did not open Modbus Slave. This bug arose in V3.1.3 where Microsoft Visual C++ .NET 2003 compiler was used. Read more: http://www.codeguru.com/cpp/w-d/doc_view/misc/article.php/c8549/ Version 3.1.4 - BUG: Max number of registers with the OLE/Automation was 127 should be 2048 Version 3.1.3 - BUG: Memory leak problem with the OLE/A