AD9910-DDS模块驱动stm32f407

资源内容介绍

AD9910是一款高性能、高精度的数字直接合成（DDS）芯片，广泛应用于射频与微波信号发生器、测试设备以及通信系统等领域。STM32F407是意法半导体公司推出的基于ARM Cortex-M4内核的微控制器，拥有强大的计算能力和丰富的外设接口，适用于各种嵌入式应用。在“AD9910-DDS模块驱动stm32f407”项目中，主要涉及以下关键知识点：1. 数字直接合成（DDS）技术：DDS是一种利用数字信号处理技术来产生模拟正弦波的方法。它通过快速改变频率控制字来改变输出信号的频率，具有频率分辨率高、频率切换速度快和输出信号质量高等优点。AD9910作为DDS芯片，能提供高达1.6GHz的输出频率，并支持多种波形输出。2. AD9910芯片特性：AD9910具有内置的相位累加器、频率调制器、DA转换器和低通滤波器。用户可以通过SPI或并行接口设置频率控制字、相位偏移和幅度控制，实现对输出信号的精细调节。3. STM32F407微控制器：STM32F407系列是STM32家族的一员，具备浮点运算单元（FPU）、高速存储器和多种外设接口。在驱动AD9910时，其强大的处理能力可以轻松处理DDS算法的计算任务，同时，通过SPI接口与AD9910进行通信，控制DDS的工作状态。4. 驱动程序开发：驱动程序是操作系统与硬件设备之间的桥梁，它定义了如何操作和控制硬件。在这个项目中，开发者需要编写针对AD9910的驱动程序，包括初始化配置、频率设置、波形控制等功能。驱动程序通常包含初始化函数、数据传输函数和状态查询等部分。5. Keil集成开发环境（IDE）：Keil是常用的嵌入式开发工具，提供了C/C++编译器、调试器和项目管理工具。在Keil中创建的工程文件，可以帮助开发者组织代码、编译和调试程序。6. 嵌入式系统编程：在嵌入式系统中，程序需要直接控制硬件，因此开发者需要理解硬件的工作原理，并且能够熟练使用中断、定时器等系统资源。7. 电子竞赛（电赛）应用：这个项目可能源于电子设计竞赛，参赛者需要使用STM32和AD9910构建一个功能完整的信号发生器，这涉及到电路设计、软件开发和实际操作技能。"AD9910-DDS模块驱动stm32f407"项目涵盖了DDS技术、微控制器应用、驱动程序设计、嵌入式系统开发等多个领域，对于学习和提升嵌入式系统的开发能力具有很高的价值。通过这个项目，开发者可以深入理解数字信号处理、微控制器硬件接口和软件驱动的实现细节。

/** ****************************************************************************** * @file stm32f4xx_tim.c * @author MCD Application Team * @version V1.4.0 * @date 04-August-2014 * @brief This file provides firmware functions to manage the following * functionalities of the TIM peripheral: * + TimeBase management * + Output Compare management * + Input Capture management * + Advanced-control timers (TIM1 and TIM8) specific features * + Interrupts, DMA and flags management * + Clocks management * + Synchronization management * + Specific interface management * + Specific remapping management * @verbatim =============================================================================== ##### How to use this driver ##### =============================================================================== [..] This driver provides functions to configure and program the TIM of all STM32F4xx devices. These functions are split in 9 groups: (#) TIM TimeBase management: this group includes all needed functions to configure the TM Timebase unit: (++) Set/Get Prescaler (++) Set/Get Autoreload (++) Counter modes configuration (++) Set Clock division (++) Select the One Pulse mode (++) Update Request Configuration (++) Update Disable Configuration (++) Auto-Preload Configuration (++) Enable/Disable the counter (#) TIM Output Compare management: this group includes all needed functions to configure the Capture/Compare unit used in Output compare mode: (++) Configure each channel, independently, in Output Compare mode (++) Select the output compare modes (++) Select the Polarities of each channel (++) Set/Get the Capture/Compare register values (++) Select the Output Compare Fast mode (++) Select the Output Compare Forced mode (++) Output Compare-Preload Configuration (++) Clear Output Compare Reference (++) Select the OCREF Clear signal (++) Enable/Disable the Capture/Compare Channels (#) TIM Input Capture management: this group includes all needed functions to configure the Capture/Compare unit used in Input Capture mode: (++) Configure each channel in input capture mode (++) Configure Channel1/2 in PWM Input mode (++) Set the Input Capture Prescaler (++) Get the Capture/Compare values (#) Advanced-control timers (TIM1 and TIM8) specific features (++) Configures the Break input, dead time, Lock level, the OSSI, the OSSR State and the AOE(automatic output enable) (++) Enable/Disable the TIM peripheral Main Outputs (++) Select the Commutation event (++) Set/Reset the Capture Compare Preload Control bit (#) TIM interrupts, DMA and flags management (++) Enable/Disable interrupt sources (++) Get flags status (++) Clear flags/ Pending bits (++) Enable/Disable DMA requests (++) Configure DMA burst mode (++) Select CaptureCompare DMA request (#) TIM clocks management: this group includes all needed functions to configure the clock controller unit: (++) Select internal/External clock (++) Select the external clock mode: ETR(Mode1/Mode2), TIx or ITRx (#) TIM synchronization management: this group includes all needed functions to configure the Synchronization unit: (++) Select Input Trigger (++) Select Output Trigger (++) Select Master Slave Mode (++) ETR Configuration when used as external trigger (#) TIM specific interface management, this group includes all needed functions to use the specific TIM interface: (++) Encoder Interface Configuration (++) Select Hall Sensor (#) TIM specific remapping management includes the Remapping configuration of specific timers @endverbatim ****************************************************************************** * @attention * * <h2><center>© COPYRIGHT 2014 STMicroelectronics</center></h2> * * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); * You may not use this file except in compliance with the License. * You may obtain a copy of the License at: * * http://www.st.com/software_license_agreement_liberty_v2 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. * ****************************************************************************** */#include "stm32f4xx_tim.h"#include "stm32f4xx_rcc.h"/** @addtogroup STM32F4xx_StdPeriph_Driver * @{ *//** @defgroup TIM * @brief TIM driver modules * @{ */#define SMCR_ETR_MASK ((uint16_t)0x00FF) #define CCMR_OFFSET ((uint16_t)0x0018)#define CCER_CCE_SET ((uint16_t)0x0001) #define CCER_CCNE_SET ((uint16_t)0x0004) #define CCMR_OC13M_MASK ((uint16_t)0xFF8F)#define CCMR_OC24M_MASK ((uint16_t)0x8FFF) static void TI1_Config(TIM_TypeDef* TIMx, uint16_t TIM_ICPolarity, uint16_t TIM_ICSelection, uint16_t TIM_ICFilter);static void TI2_Config(TIM_TypeDef* TIMx, uint16_t TIM_ICPolarity, uint16_t TIM_ICSelection, uint16_t TIM_ICFilter);static void TI3_Config(TIM_TypeDef* TIMx, uint16_t TIM_ICPolarity, uint16_t TIM_ICSelection, uint16_t TIM_ICFilter);static void TI4_Config(TIM_TypeDef* TIMx, uint16_t TIM_ICPolarity, uint16_t TIM_ICSelection, uint16_t TIM_ICFilter);/** @defgroup TIM_Private_Functions * @{ *//** @defgroup TIM_Group1 TimeBase management functions * @brief TimeBase management functions *@verbatim =============================================================================== ##### TimeBase management functions ##### =============================================================================== ##### TIM Driver: how to use it in Timing(Time base) Mode ##### =============================================================================== [..] To use the Timer in Timing(Time base) mode, the following steps are mandatory: (#) Enable TIM clock using RCC_APBxPeriphClockCmd&#40;RCC_APBxPeriph_TIMx, ENABLE&#41; function (#) Fill the TIM_TimeBaseInitStruct with the desired parameters. (#) C