下载资源存储资源详情
电机加减速初版.zip
大小:256.32KB
价格:30积分
下载量:0
评分:
5.0
上传者:2302_80157669
更新日期:2025-09-22

电机加减速初版.zip

资源文件列表(大概)

文件名
大小
电机加减速/CORE/
-
电机加减速/DYHS/
-
电机加减速/FWLIB/
-
电机加减速/USER/
-
电机加减速/FWLIB/inc/
-
电机加减速/FWLIB/src/
-
电机加减速/USER/DebugConfig/
-
电机加减速/USER/Listings/
-
电机加减速/USER/Objects/
-
电机加减速/CORE/core_cm3.c
16.87KB
电机加减速/CORE/core_cm3.h
83.71KB
电机加减速/CORE/startup_stm32f10x_cl.s
15.4KB
电机加减速/CORE/startup_stm32f10x_hd.s
15.14KB
电机加减速/CORE/startup_stm32f10x_hd_vl.s
15.32KB
电机加减速/CORE/startup_stm32f10x_ld.s
12.09KB
电机加减速/CORE/startup_stm32f10x_ld_vl.s
13.34KB
电机加减速/CORE/startup_stm32f10x_md.s
12.47KB
电机加减速/CORE/startup_stm32f10x_md_vl.s
13.74KB
电机加减速/CORE/startup_stm32f10x_xl.s
15.58KB
电机加减速/DYHS/Delay.c
838B
电机加减速/DYHS/Delay.h
135B
电机加减速/FWLIB/inc/misc.h
8.77KB
电机加减速/FWLIB/inc/stm32f10x_adc.h
21.18KB
电机加减速/FWLIB/inc/stm32f10x_bkp.h
7.38KB
电机加减速/FWLIB/inc/stm32f10x_can.h
26.91KB
电机加减速/FWLIB/inc/stm32f10x_cec.h
6.42KB
电机加减速/FWLIB/inc/stm32f10x_crc.h
2.11KB
电机加减速/FWLIB/inc/stm32f10x_dac.h
14.88KB
电机加减速/FWLIB/inc/stm32f10x_dbgmcu.h
3.73KB
电机加减速/FWLIB/inc/stm32f10x_dma.h
20.27KB
电机加减速/FWLIB/inc/stm32f10x_exti.h
6.66KB
电机加减速/FWLIB/inc/stm32f10x_flash.h
24.85KB
电机加减速/FWLIB/inc/stm32f10x_fsmc.h
26.38KB
电机加减速/FWLIB/inc/stm32f10x_gpio.h
19.7KB
电机加减速/FWLIB/inc/stm32f10x_i2c.h
29.33KB
电机加减速/FWLIB/inc/stm32f10x_iwdg.h
3.74KB
电机加减速/FWLIB/inc/stm32f10x_pwr.h
4.28KB
电机加减速/FWLIB/inc/stm32f10x_rcc.h
29.74KB
电机加减速/FWLIB/inc/stm32f10x_rtc.h
3.77KB
电机加减速/FWLIB/inc/stm32f10x_sdio.h
21.35KB
电机加减速/FWLIB/inc/stm32f10x_spi.h
17.31KB
电机加减速/FWLIB/inc/stm32f10x_tim.h
51.2KB
电机加减速/FWLIB/inc/stm32f10x_usart.h
16.16KB
电机加减速/FWLIB/inc/stm32f10x_wwdg.h
2.9KB
电机加减速/FWLIB/src/misc.c
6.88KB
电机加减速/FWLIB/src/stm32f10x_adc.c
46.09KB
电机加减速/FWLIB/src/stm32f10x_bkp.c
8.26KB
电机加减速/FWLIB/src/stm32f10x_can.c
44.05KB
电机加减速/FWLIB/src/stm32f10x_cec.c
11.38KB
电机加减速/FWLIB/src/stm32f10x_crc.c
3.27KB
电机加减速/FWLIB/src/stm32f10x_dac.c
18.64KB
电机加减速/FWLIB/src/stm32f10x_dbgmcu.c
5.03KB
电机加减速/FWLIB/src/stm32f10x_dma.c
28.91KB
电机加减速/FWLIB/src/stm32f10x_exti.c
6.8KB
电机加减速/FWLIB/src/stm32f10x_flash.c
61.08KB
电机加减速/FWLIB/src/stm32f10x_fsmc.c
34.65KB
电机加减速/FWLIB/src/stm32f10x_gpio.c
22.68KB
电机加减速/FWLIB/src/stm32f10x_i2c.c
44.71KB
电机加减速/FWLIB/src/stm32f10x_iwdg.c
4.8KB
电机加减速/FWLIB/src/stm32f10x_pwr.c
8.55KB
电机加减速/FWLIB/src/stm32f10x_rcc.c
50.07KB
电机加减速/FWLIB/src/stm32f10x_rtc.c
8.4KB
电机加减速/FWLIB/src/stm32f10x_sdio.c
28.25KB
电机加减速/FWLIB/src/stm32f10x_spi.c
29.52KB
电机加减速/FWLIB/src/stm32f10x_tim.c
106.6KB
电机加减速/FWLIB/src/stm32f10x_usart.c
37.41KB
电机加减速/FWLIB/src/stm32f10x_wwdg.c
5.6KB
电机加减速/USER/EventRecorderStub.scvd
339B
电机加减速/USER/keilkill.bat
399B
电机加减速/USER/main.c
2.06KB
电机加减速/USER/readme.txt
4.33KB
电机加减速/USER/stm32f10x_conf.h
3.16KB
电机加减速/USER/stm32f10x_it.c
4.35KB
电机加减速/USER/stm32f10x_it.h
1.94KB
电机加减速/USER/system_stm32f10x.c
35.72KB
电机加减速/USER/txet1.uvguix.陈皓月
170.42KB
电机加减速/USER/txet1.uvoptx
17.42KB
电机加减速/USER/txet1.uvprojx
18.92KB
电机加减速/USER/DebugConfig/Target_1_STM32F103C8_1.0.0.dbgconf
2.35KB

资源内容介绍

keil5：步进电机（S）曲线加减速代码
/** @page GPIO_IOToggle GPIO IO Toggle example @verbatim ******************** (C) COPYRIGHT 2011 STMicroelectronics ******************* * @file GPIO/IOToggle/readme.txt * @author MCD Application Team * @version V3.5.0 * @date 08-April-2011 * @brief Description of the GPIO IO Toggle example. ****************************************************************************** * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. ****************************************************************************** @endverbatim@par Example Description GPIO ports are connected on APB2 bus, using BSRRH and BSRRL registers 2 cycles are required to set a pin and another cycle to reset it. So GPIO pins can toggle at AHB clock divided by 4.This example describes how to use BSRR and BRR (Port Bit Set/Reset Registerand Port Bit Reset Register) for maximum IO toggling.PD0 and PD2 (configured in output pushpull mode) toggles in a forever loop: - Set PD0 and PD2 by setting corresponding bits in BSRR register - Reset PD0 and PD2 by setting corresponding bits in BRR registerIn this example, HCLK is configured at 72 MHz so PD0 and PD2 toggles at 18MHz.To achieve the maximum IO toggling frequency, you have to configure your compileroptions for high speed optimization.@par Directory contents - GPIO/IOToggle/stm32f10x_conf.h Library Configuration file - GPIO/IOToggle/stm32f10x_it.c Interrupt handlers - GPIO/IOToggle/stm32f10x_it.h Header for stm32f10x_it.c - GPIO/IOToggle/main.c Main program - GPIO/IOToggle/system_stm32f10x.c STM32F10x system source file @par Hardware and Software environment - This example runs on STM32F10x Connectivity line, High-Density, High-Density Value line, Medium-Density, XL-Density, Medium-Density Value line, Low-Density and Low-Density Value line Devices. - This example has been tested with STMicroelectronics STM32100E-EVAL (High-Density Value line), STM32100B-EVAL (Medium-Density Value line), STM3210C-EVAL (Connectivity line), STM3210E-EVAL (High-Density and XL-Density) and STM3210B-EVAL (Medium-Density) evaluation boards and can be easily tailored to any other supported device and development board. To select the STMicroelectronics evaluation board used to run the example, uncomment the corresponding line in stm32_eval.h file (under Utilities\STM32_EVAL)@par How to use it ? In order to make the program work, you must do the following : - Copy all source files from this example folder to the template folder under Project\STM32F10x_StdPeriph_Template - Open your preferred toolchain - Rebuild all files and load your image into target memory - Run the example@note - Low-density Value line devices are STM32F100xx microcontrollers where the Flash memory density ranges between 16 and 32 Kbytes. - Low-density devices are STM32F101xx, STM32F102xx and STM32F103xx microcontrollers where the Flash memory density ranges between 16 and 32 Kbytes. - Medium-density Value line devices are STM32F100xx microcontrollers where the Flash memory density ranges between 64 and 128 Kbytes. - Medium-density devices are STM32F101xx, STM32F102xx and STM32F103xx microcontrollers where the Flash memory density ranges between 64 and 128 Kbytes. - High-density Value line devices are STM32F100xx microcontrollers where the Flash memory density ranges between 256 and 512 Kbytes. - High-density devices are STM32F101xx and STM32F103xx microcontrollers where the Flash memory density ranges between 256 and 512 Kbytes. - XL-density devices are STM32F101xx and STM32F103xx microcontrollers where the Flash memory density ranges between 512 and 1024 Kbytes. - Connectivity line devices are STM32F105xx and STM32F107xx microcontrollers. * <h3><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h3> */

用户评论 (0)

发表评论

captcha

相关资源

Microsoft Visual Studio 2015 Installer Projects VSI-bundle.exe

在Visual Studio中找不到Visual Studio Installer项目的原因可能是Visual Studio没有安装相应的扩展。可以去官网下载，但下载很慢。下面是我下载完成的 VSI_bundle.exe 在 Microsoft Visual Studio 2015 Installer Projects 文件夹的   VSI_bundle.exe 就是安装文件。下载完成后，点击 VSI_bundle.exe ，右键 属性 按下图进行设置设置选择 “兼容性”（兼容：win7）和设置选择“管理员身份运行” 。然后双击安装VSI_bundle.exe即可。安装完成后，重启Visual Studio 2015 即可 在软件上看到了。

4.86MB10积分

水下无人自主潜航器故障诊断数据集

免费公开数据集转载。包含5种故障状态，多种传感器在不同故障状态下采集信号。

6.96MB13积分

51单片机控制三个步进电机的启动停止加protrus仿真

51单片机控制三个步进电机的启动停止加protrus仿真

137.27KB35积分

DS18B20温度数据采集上报

DS18B20温度数据采集上报

325.07KB24积分